|
Use IronTech™ to prevent & correct iron & micronutrient deficiencies.
GUARANTEED ANALYSIS
Nutrient Percentage per Volume
| Copper (Cu) |
— |
0.10.00% |
0.10%
|
} |
Water Soluble Copper (Cu)
|
| Iron (Fe) |
— |
4.00% |
4.0%
|
} |
Water Soluble Iron (Fe)
|
| Manganese (Mn) |
— |
1.00% |
1.0%
|
} |
Water Soluble Manganese (Mn)
|
| Zinc (Zn) |
— |
1.00% |
1.0%
|
} |
Water Soluble Zinc (Zn)
|
Derived From:
copper, iron, manganese, and zinc sulphates.
1 U.S. Gallon • Net Weight 12 lbs • 3.76 Liters • 5.45 Kg • Specific Gravity 1.43 • pH: 2.7
KEY BENEFITS
• A broad spectrum micronutrient fertilizer containing organic-based chelates of iron, zinc, manganese and copper. It can be applied to lawns, trees, shrubs, greenhouse plants, flowers and gardens. Any plant with Iron Chlorosis or micronutrient deficiencies can be effectively foliated with "IRONTECH".
• Readily absorbed by the plant, translocated to various tissues, and metabolized for optimum growth and development.
• "INJECTOR READY". Nutrients are in a balanced form, optimal for uptake and translocation.
• Will mix in most solutions. The nutrients are readily absorbed by the plant for a faster response.
• Provides both nitrogen and iron, which are crucial to healthy greening due to their direct involovement in chlorophyll formation..
• Easy to use. It is a concentrate so there's no mixing. Set at appropriate dilution ratio for desired application equipment.
• Earth friendly and 100% biodegradable
• Can be applied with drip line systems, fertigation/injector, and is also effective foliar.
APPLICATION GUIDE
• Professional Turf Foliar Application: For best results apply as a foliar early in the morning or late in the evening. Apply with 2 gallons of water per 1,000 FT². Use a non-ionic organic surfactant for all foliar application to decrease droplet sizes and enhance wetting of the entire surface. Additionally, do not water for 6-12 hours after application to allow time for the uptake of nutrients into the leaf. • WARM SEASON GRASS APPLICATION RATES :Add 8-12 fl.oz. of IronTech™ bi-weekly per 1,000 FT² or 10-14 oz. of IronTech™ monthly per 1,000 FT² as needed. • COOL SEASON GRASS APPLICATION RATES:Add 4-8 fl.oz. of IronTech™ bi-weekly per 1,000 FT² or 8-12 oz. of IronTech™ monthly per 1,000 FT² as needed. Jar Test Before Mixing.
May not be compatible with fertilizers containing phosphates.• ORNAMENTAL, SOIL APPLICATIONS:See the chart below to determine application rates. Thoroughly soak soil around plants root zone with correct dilution. •ORNAMENTAL, FOLIAR APPLICATIONS:See the chart below to determine application rates. For best results apply as a foliar early in the morning or late evening. ORNAMENTAL, SOIL,AND FOLIAR APPLICATION RATE CHART:
ONCE A MONTH: 1oz. (2Tbs) into 1 gallon of water (29 ml into 3.75 liters)
TWICE A MONTH: 1/2 oz (1Tbs) into 1 gallon of water (15 ml into 3.75 liters)
EACH WATERING: 1/8 oz. (3/4 tsp) into 1 gallon water (3.75 ml into 3.75 liters)
MATERIAL SAFETY DATA SHEET
Issued on & Current as of 06/1/2009 (supersedes all previous versions)
SECTION 1
COMPANY IDENTIFICATION
Manufactured for Gemstarr Corporation,
PO BOX 117, Albion, Idaho, 83311
08:00–17:00 MST, Mon-Fri: 1.800.246.8873
EMERGENCY NUMBER: After hours, holiday’s, and all other non business hours; call poison control
1.800.222.1222
PRODUCT IDENTIFICATION
GEMSTARR ID #: 450
COMMON NAME: IronTech™
CHEMICAL DESCRIPTION: Nitrogen and Iron.
CHEMICAL ACTIVITY: Fe 4% Mn 1%, Zn 1%, Cu 0.1%,
SECTION 2 - HAZARDOUS INGREDIENTS/ IDENTITY INFORMATION
INGREDIENTS / HAZARDOUS COMPONENTS: (Specific Chemical Identity; OSHA PEL ACGIH TLV C.A.S. NO. SARA Common Name) (Mg/M3) (Mg/M3) %
Iron Sulphate # 7720787
SECTION 3 - PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING POINT: > H2O
SPECIFIC GRAVITY: (H2O=1) 1.43
VAPOR PRESSURE: (MM HG) N/A
VAPOR DENSITY: (AIR=1) N/A
MELTING POINT: N/A
EVAPORATION RATE: < H2O
pH: 2.7
(BUTYL ACETATE=1) N/A
APPEARANCE AND ODOR:
Dark Green, slight odor
SECTION 4 - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (METHOD): FLAMMABLE
LIMITS: LEL N/A UEL N/A EXTINGUISHING MEDIA: Water
SPECIAL FIREFIGHTING PROCEDURES: N/A
UNUSUAL FIRE & EXPLOSION HAZARDS: N/A
SECTION 5 - REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: N/A INCOMPATIBILITY (MATERIALS TO AVOID): N/A
HAZARD DECOMPOSITION OR BY-PRODUCTS: N/A
HAZARD POLYMERIZATION: May Not Occur
CONDITIONS TO AVOID: N/A
SECTION 6 - HEALTH HAZARD DATA
PRODUCT: IronTech™
TOXICITY: None Found
ROUTES (S) OF ENTRY: [Skin] [Ingestion]
CARCINOGENICITY: NTP: No
IARC Mongraphs: No
OSHA Regulated: No
HEALTH HAZARDS (ACUTE & CHRONIC) / SIGNS & SYMPTOMS OF EXPOSURE:
This product may cause eye and skin irritation (See Emergency and First Aid Procedures).
EMERGENCY AND FIRST AID PROCEDURES:
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Call a Physician. Skin: Wash contaminated areas with plenty of water for 15 minutes. Remove contaminated clothing and footwear and wash clothing before reuse. If skin Irritation continues consult a physician. Ingestion: Do not give anything by mouth to an unconscious person. If swallowed do not induce vomiting, give one or two glasses of milk or water. Contact physician immediately.
SECTION 7 - PRECAUTION FOR SAFE HANDLING AND USE
FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Absorb liquid spills with a dry absorbent, containerize usable material for disposal in an approved waste facility. WASTE DISPOSAL METHOD: Dispose in closed containers, at an approved landfill, in accordance with local, state and federal regulations. Material may also be flushed with water to a wastewater treatment system.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in enclosed containers.
OTHER PRECAUTIONS: Avoid ingestion, contact with eyes, skin and clothing.
SECTION 8 - CONTROL MEASURES
RESPIRATORY PROTECTION: NIOSH/MSHA approved for mists. Use with adequate ventilation and employ respiratory protection when exposure to mist and spray is possible.
VENTILATION: N/A (Have adequate ventilation)
PROTECTIVE GLOVES: Impervious gloves.
EYE PROTECTION: Side shield safety glasses or goggles.
OTHER PROTECTIVE CLOTHING AND EQUIPMENT: Protective clothing to minimize skin contact should be worn. Wear chemically resistant safety shoes. Wash contaminated clothing with soap and water and dry before reuse. Safety showers and eye wash facilities should be provided in all areas in which this product is handled.
WORK/HYGIENIC PRACTICES: Good housekeeping procedures should be followed to minimize exposure.
ALTHOUGH THE INFORMATION AND RECOMMENDATIONS SET FORTH HEREIN (HERE IN AFTER "INFORMATION") ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE CORRECT AS OF THE DATE HEREOF, GRIGG BROTHERS MAKES NO REPRESENTATIONS AS TO THE COMPLETENESS OR ACCURACY THEREOF. INFORMATION IS SUPPLIED UPON THE CONDITION THAT THE PERSONS RECEIVING SAME WILL MAKE THEIR OWN DETERMINATION AS TO ITS SUITABILITY FOR THEIR PURPOSES PRIOR TO USE.
IN NO EVENT WILL GRIGG BROTHERS OR ANY OF IT’S AGENTS BE RESPONSIBLE FOR DAMAGES OF ANY NATURE WHATSOEVER RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HERE UNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
|
Liquid Products 
